Whether you intend on spending an insane amount of time under your car or just during the occasional brake change, you are going to want to have a pair of quality jack stands by your side. It is alright to raise your vehicle with a jack, whether it be a scissor jack or hydraulic jack, but once your vehicle is suspended in the air, it is not advisable to work on your vehicle with all that weight resting completely on your jack due to potential safety hazards. The purpose of a good jack stand set is to keep you safe from all that automotive metal, plastic, and rubber that’s fighting gravity in attempt to get back on the ground. A perfect example of a pair of jack stands worth mentioning are the Torin 3 Ton Aluminum Jack Stands. Torin is the world’s largest manufacturer of hydraulic jacks, which is why you may notice the slight resemblance to some of the Torin aluminum jacks. As a company with longstanding experience and exceptional reputation, we couldn’t pass up the chance to review one of their many successes, the Torin 3 Ton Aluminum Jack Stands.
The most notable feature of the Torin 3 Ton Aluminum Jack Stands is the weight. These jack stands are featherweights, far lighter than the majority of stands on the market, yet they have an incredible holding capacity of 3000 pounds. It makes transportation so much easier and allows for great maneuverability when operating in confined areas. Interestingly, when it comes to jack stands, intuition would suggest that a heavier stand typically corresponds to a stronger stand. Why choose a skinny 100 pounds man to assist you raising your car, when you can get a 900 pound Hulk to do the job for you? That said, the Torin 3 tons are deceptively well built and sturdy considering their weight.
The Torin 3 Ton Aluminum jack stands have a lifting range of between 10 ¾” to 15 ⅝”. That is ideal to manage most cars from coupes to sedans and SUV’s to vans. There are 5 holes for adjusting the range, using a pin through design. We like the pin design due to its verifiable engagement and positive action required to disengage it. There is no chance of mistakenly bumping the pin and budging it as you remove that exhaust system!
Finally, worth mentioning is the base of the Torin 3 Ton Aluminum Jack Stands. These extra large bases have been manufactured with aluminum casting. The bases have an increased surface ratio, allowing for a wider spread of weight distribution. Unlike many jack stands that come with a pyramid-shaped base, the Torin 3 Ton obtains it’s strength from the single upright pillar design which directly transfers the load to the ground rather than vectoring it like jack stands with angled legs.
The Torin 3 Ton Aluminum Jack Stands, as we mentioned earlier, are incredibly lightweight, weighing in at only 5 lbs each, Not only are they lightweight, but because of the design, they are also easy for storage. The frame and the base of the Torin jack stands have an all-anodized finish, providing corrosion protection. The overall build quality as well as the fit and finish are top notch. These are easily in the top 10% of jack stands we have handled.
When it comes to lightweight design that ensures quality and reliability, you will always be looking to spend a little extra. The Torin Aluminums are no exception to this rule. They are indeed a little pricier than many stands on the market, but the tradeoff is their high quality. If you are looking for something lighter than a pair of ordinary jack stands, we recommend you get yourself a pair of Torin 3 Ton Aluminum Jack Stands. Shopping around a bit will reveal that major online retailers tend to have the best prices. Amazon’s price seems to be pretty darn competitive so we recommend starting there. Overall, despite the nominal increase to the price tag over plain jane jack stands, these are still a high value due to their light weight and high quality. One of the best sets of jack stands around!