A gear puller typically consists of three different parts. They are the jaws, cross arms, and forcing screw. Each of these parts serves a different purpose. The jaw’s purpose is to grasp the gear; the cross arms attach the jaws to the forcing screw; and the forcing screw applies force to the gear when turned.
When it comes to picking a good gear puller, the most important factor is good quality. Strength and durability are extremely important.
Working a gear puller is actually pretty simple. It can all be explained in two easy steps. First, you have to adjust the gear puller. You just simply adjust the cross arms so that the jaws fit snugly over the gear. One of the most important things to notice during this step is that the forcing screw sits in the center of the gear and touches the shaft.
Once you have adjusted the gear puller properly, the next step is to tighten the forcing screw to remove the gear. You simply take a socket wrench or ratchet, place it over the forcing screw, and tighten away. As you tighten the forcing screw slowly, eventually the gear will come off. Pretty simple.
Before you use a gear puller, there is one very important step that you must do. You obviously have to find and purchase the best gear puller for the job. We might be able to save you some time, as we have a recommendation!
Best Gear Puller
When it comes to quality, we are impressed! The drive screw is made out of cold rolled steel, so it is much more tolerant to stress. The jaw arms are also made of steel. When working on engines, tools need to be of exceptional quality. There’s nothing worse than low quality tools breaking during a task. This gear puller is definitely tough with equally good fit and finish.
Lastly, it is important to recognize this tool’s functionality. With its reversible jaws, the puller can grip in eight different ways. It can either grip through inside openings or around the outside edge. The length of reach can also be adjusted, so that it can work for a variety of gear pulling situations. The reach can be adjusted for short, standard, long, or extra long requirements. It distributes pulling forces evenly, so that the gears are removed efficiently and without concern of causing damage.
In our opinion, the Tekton 5696 Gear Puller Set has proven itself worthy of being called the best. The combination features and value make the task of removing a gear a simple and a cheap one. As far as where to buy, Amazon’s is pretty competitively priced and is worth checking out. Overall, this gear puller gets a strong recommendation and we think it will serve your needs admirably! Happy Wrenching!
Click here to see more pictures, read more reviews, and see prices.